Usb i – Metrologic Instruments MS7620 User Manual
Page 14
Advertising
11
I
NSTALLATION FOR
USB I
NTERFACE
Manufacturers Note:
Plugging the scanner into the USB port of the PC does not guarantee that
scanned information will appear at the PC. A software driver and correct
configuration setting are also required for proper communication to occur.
6. Scan
the
Enable USB Defaults bar
code to configure the MS7600 for
USB communication.
7. Turn on the host system.
³
9
9
9 9
7
8
Enable USB Defaults
Advertising