Dle> shielded codes sent to the modem (dce) – Multi-Tech Systems MT5600SMI-34 User Manual
Page 102
Chapter 7 – Voice Commands
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide
102
<DLE> Shielded Codes Sent to the Modem (DCE)
Table 7-3 lists the supported <DLE> shielded codes sent to the modem in the expression <DLE><code>.
The number in parenthesis in the second column corresponds to the T.50 equivalent.
Table 7-3. Supported <DLE> Shielded Codes Sent to the Modem (DCE)
Code
Code
Simple Action Command Description
<DLE>
(1/0)
Two contiguous <DLE><DLE> codes indicate a single <DLE>
in the data stream ("Immediate Command" or "Stream
Command")
u
(7/5)
[Action Numbers 0 and 3] Increase the volume or gain by one
unit ("Immediate Command")
d
(6/4)
[Action Numbers 1 and 4] Decrease the volume or gain by one
unit ("Immediate Command")
p
(7/0)
[Action Number 9] Pause
r
(7/2)
[Action Number 10] Resume
<ETX>
(0/3)
[Action Number 11] End voice Transmit State ("Stream
Command")
<CAN>
(1/8)
[Action Number 12] Clear transmit buffer of voice data
("Immediate Command")
!
(2/1)
[Action Number 15] Receive abort ("Immediate Command")