Mr. Coffee BMR 200 User Manual

Page 16

Advertising
background image

PROPER CARE AND CLEANING OF

THE BREADMAKER BY MR. COFFEE

l

Unplug the power cord and allow the breadmaker TO cool completely,

Caution: Do not pour water into the inner case or submerge the breadmaker
in water.

l

Use only a mild detergent

tO

clean the breadmaker. To avoid damaging the

smooth surfaces of the breadmaker and

inner pot, do not use chemical liquid

cleaners (such as benzene or thinners), nonabrasive or abrasive cleansers, or

scrubbing brushes or pads to clean the breadmaker or inner

pot

surfaces.

The Unit Body, Lid and Inner Case

l

Wipe the outside of the unit body and the lid with a damp cloth.

l

Remove any flour, bread crumbs or other materials from the inside of the inner

case using a damp sponge or cloth or a small portable vacuum cleaner.

The inner Pot and Kneader Blade

l

Both the inner pot

and the kneader blade are coated with a nonstick surface.

Do not use any cleaners or utensils that could scratch this surface.

. The nonstick surface may change in appearance after continued used.

This is

caused by moisture and steam and has no effect on its

use or quality.

.

l

Remove the inner pot with kneader blade from the inner case and wash with a

damp sponge

or dishcloth, making sure the kneader blade mounting shaft is also

very clean. The inner pot interior can be washed with soapy waler, but do not

submerge inner pot in water. Wash after each use and dry thoroughly.

l

Do not soak either part in water or wash in a dishwasher.

,

l

If it is difficult to remove the kneader blade from the inner pot, fill the inner pot

with warm water and let it stand a few minutes

IO

allow any baked-on bread

dough to soften.

l

If the hole in the kneader blade becomes clogged, clean It out with a soft bristle

brush or wooden or plastic toothpicks.

Before Storing the tlreadmaker

l

Make sure the breadmaker base has cooled completely and all parts have been

thoroughly

cleaned and dried.

l

Leave th e lid open until the breadmaker is completely cool. This will avoid the
furmation of any moisture in the inner case.

Advertising