Mr. Coffee ECMPl - Manual (Page 3)

SPECIAL CORD SET INSTRUCTIONS
A short power supply cord Is provided to reduce the hazards resulting
from becoming entangled In or tripping over-a longer cord.
2. An extenslon cord may be purchased and used If care Is exercised In
i t s u s e .
3. If an extension cord Is used, the marked electrical rating of the exten-
sion cord must be at least 10 amps and 120 volts. The resulting
extended cord must be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children or
tripped over accidentally.
Note:
This appliance has a polarized plug (one blade Is larger than the
other). As a safety feature, this plug will fit in a polarized outlet
only one way. If the plug does not fully fit in the outlet, reverse
the plug. If lt still does not fit, contact a qualified electrlclan. Do
not attempt to defeat this safety feature.
CAUTION:
1) Do not remove the filter holder at any tlme durlng
the brewlng process.
2) Do not let the pump run wlth an empty water contalner.
Thls can damage the pump permanently.
3) Use caution when removing the filter holder from the
brew head. The metal parts may still be very hot. Also,
there may be hot water floating on the top of the filter
basket.
4) WHEN USING OR CLEANING THE FROTHING TUBE:
Place a frothlng pitcher or large cup (with a 16 ounce
cspaclty) half full of water or milk under the frothlng tube.
Make sure the tip of the frothlng tube Is submerged In
liquid before turning on the steam selector control knob.