Fl off standby – Marantz VP8600 User Manual

Page 13

Advertising
background image

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Player/Satellite
/Cable Tuner /PC using DVI-D IN port.

1.

Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to
the DVI-D IN port on the projector.

2.

Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or
personal computer.

Note :

When projecting a video image from a device connected to the DVI-D terminal,
follow the procedure below.

1. Turn on power of this unit.
2. Set the input video source to DVI-D input.
3. Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD
player).

If the procedure above is not followed, projected image may corrupt.
For the details of the DVI-D terminal on the device connected with the unit, see the
instruction manual of the device.

Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC

RGB OUT

or

DVI-D out

RGB OUT

or

DVI-D out

RGB (D-Sub monitor) cable

(commercially available)

HD-Video / Satellite /

Cable Tuner / DVD Player

Monitor output

IBM VGA or

Compatible PC

RGB out

or

DVI-D out

or

HDMI out

DVI-D cable

(commercially available)

RGB out

or

DVI-D out

8

ENGLISH

COMPONENT 1: SCART

When connecting the COMPONENT 1 terminal to the SCART (RGB) out terminal, set
COMPONENT 1 settings to [SCART]. (

P.19)

FL OFF

STANDBY

SCART CONNECTOR

DVD Player

Scart to RGBCS cable

(commercially available)

PC

MONITOR OUT

V

H

R

B

G

5RCA cable

(commercially available)

COMPONENT 1: RGB

When connecting the COMPONENT 1 terminal to the RGB HV out terminal, set
COMPONENT 1 settings to [RGB]. (

P.19)

Advertising