Marantz VP8600 - Manual (Page 16)

11
ENGLISH
There are hot keys on the remote control that let you adjust contrast, sharpness, tint, color,
brightness. When you press one of these hot keys, a slide bar is overlayed on the source
image. Use the +/– button to adjust the value. Press the
EXIT button to close an image slide
bar, or press an image hot key to automatically close the current slide bar and open the next.
❖
Contrast Control
Use the contrast control to adjust the contrast between light and dark areas of the projected
image.
1. Press the CON+ / CON– button.
The contrast slide bar appears.
2. Press the CON+ / CON– button to
increase/decrease the contrast.
3. Press the EXIT button to close the
contrast slide bar.
❖
Sharpness Control
Use the sharpness control to adjust the image sharpness. The sharpness control is not
available in PC mode.
1. Press the SHA+ / SHA– button.
The sharpness slide bar appears.
2. Press the SHA+ / SHA– button to
increase/decrease the sharpness.
3. Press the EXIT button to close the
sharpness slide bar.
Adjusting the Image
FREEZE
SHAPRAESS TINT COLOR INFO.
SHA+ TINT+ COL+
CON-
ON/OFF INPUT
PIP
SWAP MENU
CON+ BRI- BRI+
W-PEAK
PEAK WHITE
EXIT
E F
CONTRAST BRIGHTNESS
CON-
CON+
SHAPRAESS TINT COLOR INFO.
SHA+ TINT+ COL+
CON- CON+ BRI- BRI+
W-PEAK
PEAK WHITE
SHA- TINT- COL-
CONTRAST BRIGHTNESS
SHA+
SHA-
❖
Tint Control
Use the tint control to adjust color hue to obtain true color reproduction. The tint control is not
available in PC mode.
1. Press the TINT+ / TINT– button.
The tint slide bar appears.
2. Press the TINT+ / TINT– button to
increase/decrease the tint.
3. Press the EXIT button to close the tint
slide bar.
❖
Color Control
Use the color control to adjust the color saturation level. The color control is not available in
PC mode.
1. Press the COL+ / COL– button.
The color slide bar appears.
2. Press the COL+ / COL– button to
increase/decrease the color.
3. Press the EXIT button to close the color
slide bar.
❖
Brightness Control
Use the brightness control to adjust the overall light output.
1. Press the BRI+ / BRI– button.
The brightness slide bar appears.
2. Press the BRI+ / BRI– button to
increase/decrease the brightness.
3. Press the EXIT button to close the
brightness slide bar.
SHAPRAESS TINT COLOR INFO.
SHA+ TINT+ COL+
CON- CON+ BRI- BRI+
W-PEAK
PEAK
WHITE
SHA- TINT- COL-
CONTRAST BRIGHTNESS
TINT+
TINT-
SHAPRAESS TINT COLOR INFO.
SHA+ TINT+ COL+
CON- CON+ BRI- BRI+
W-PEAK
PEAK WHITE
SHA- TINT- COL-
CONTRAST BRIGHTNESS
COL+
COL-
FREEZE
SHAPRAESS TINT COLOR INFO.
SHA+ TINT+ COL+
CON-
ON/OFF INPUT
PIP
SWAP MENU
CON+ BRI- BRI+
W-PEAK
PEAK
WHITE
SHA- TINT- COL-
EXIT
CONTRAST BRIGHTNESS
BRI-
BRI+
For Video
For PC/HD