Marantz VP-11S1 User Manual

Page 20

Advertising
background image

12

ENGLISH

You can position the projected image by changing the
height of the projector’s adjusters.

1.

Move the adjuster lever to the left or right to
enable adjuster changing. Carefully lift the
projector.

2.

Once having positioned the projector, return the
adjuster lever as before to lock in place. Check
the adjusters are securely locked before
releasing your hands from the projector.

3.

Turn the adjuster to fine-adjust the height.

Returning the Projector to its Initial Position

Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down.

When the projecting image is a trapezoid, correct it in Keystone and in the Display Menu.
See “Display”. (

P.26)

When using the keystone feature to correct a trapezoidal image, picture contours can look like staircases
because of image correction.

Keystone

(Electronic keystone correction)

Keystone Correction

Adjusting the Height

You can adjust the image position with the Lens Shift knob.

Turn the Lens Shift knob to clockwise : The image goes up.

Turn the Lens Shift knob to counterclockwise : The image goes down.

Adjusting the Image Position

Up

Down

Counterclockwise

Clockwise

Advertising
This manual is related to the following products: