Motorola F5217A User Manual
Page 11
 
11
• Pressing the Emergency key of the MW800 display 
• Pressing the Function key of the MW800 display 
• Power button (if configured) 
 
A contact to the touch panel, pressing the Emergency key or function key can resume 
the CPU out of standby if its setting specifies the operating system to come out of a 
low power state when there is USB activity. To enable this feature, Allow this 
device to bring the computer out of standby option (Power Management tab in 
Properties) should be selected. For details about this option, refer to the help file 
attached to the Properties of the device. 
Default setting of the operating system allows resume from the touch panel, 
emergency and function keys. 
 
Pressing of the Power button will bring the computer out of standby if its setting 
specifies the operating system to come out of a low power state when you press the 
Power button. For details about this option, refer to the help file attached to Power 
Options (Start -> Settings -> Control Panel -> Power Options). 
Default setting of the operating system does not allow resume from the power 
button. 
 
Volume Adjustment
Two control buttons for volume adjustment (Volume Up and Volume Down) in 
conjunction with software Volume Control application allow setting of volume level. 
Volume window allows color modifications and pops-up on every volume change. If 
your display unit includes BlueTooth component, this application also allows 
commutation of audio stream to the BlueTooth device. 
 
Brightness Adjustment
Two control buttons for brightness adjustment (Brightness Up and Brightness 
Down) allow setting of brightness level. The display allows limiting relative 
brightness level, which cannot be exceeded by this display. See the Maximum 
Brightness parameter in section 3. 
 
Emergency key operation
The display is equipped with the large bright-red emergency button. When the 
emergency button is pressed, the display provides high-priority data event to the 
CPU box operating system. That intends for a customer software emergency 
applications that may hook and process this event.