Motorola F5217A - Manual (Page 15)

15
• Power off on USB 5V Absence Turn the display off as soon as the
CPU unit is powered off. Factory
setting is NO.
• Power off on CPU REQUEST Turn the display off when CPU
power-off request is received.
Factory setting is YES.
• Power off by Power Button Turn the display off as soon as the
display Power Button is pressed.
Factory setting is YES.
Idle Time-out when CPU is not powered
This parameter provides several options to power on the display while the CPU is
off. The following options are available:
• NEVER Does not power on if the CPU is off.
• 10 sec Power on and wait up to 10 seconds for the CPU trigger
(USB 5V presence). If 10-second time-out is expired and
the CPU trigger did not occur, the display will power itself
off.
• FOREVER Power on and wait for the CPU power up without any time
limitation.
Factory setting is 10 seconds.
Bluetooth Device on Power Up
Indicates presence of the Bluetooth hardware. This field is set when BT hardware
exists and supports audio; otherwise it is reset. Factory setting is ON.
Brightness Threshold
Shows relative brightness threshold for LCD temperature control. This is factory
setting.
Brightness Slope
Shows the slope of brightness decreasing for the LCD temperature control. This is
factory setting.
Maximum Brightness
Defines relative brightness level, which cannot be exceeded by this display. The
parameter can be changed in the range from 0 to 63; factory setting is 63.
Number of Displays
Defines connection of one or two displays to the CPU. Factory setting is ONE.