Miele GAS KM 81-2 - Manual (Page 14)

Cleaning and care
In the event of a pan boiling over, clean
the burner and the cooktop surface im-
mediately, to prevent the boiled over
substance from burning on.
Burner
The burner can be dismantled for
cleaning when cold.
Burner caps
The burner caps can be cleaned with a
solution of dishwashing liquid.
Do not use any caustic cleaners,
scouring powders, knives or hard
brushes, as these will cause scrat-
ches.
With time and use, the surface of the
burner caps will become dull.
Electronic ignition
The ignition device electrodes on
the burner must always be dry,
otherwise they will not spark.
From time to time, the electrodes
should be wiped with a well wrung-out
cloth and wiped dry with a clean cloth.
Important: Do not damage the igni-
tion electrodes and the thermo
element.
Important: The burner must be cor-
rectly fitted together before it is lit,
otherwise the ignition device could
be damaged.
When fitting the large burner cap base
to the burner base, ensure that the lo-
cating lug fits exactly into the appropri-
ate notch.
Place the burner ring onto the large bur-
ner cap base.
Place the large burner cap onto the
large burner cap base, ensuring that
the locating lug fits exactly into the ap-
propriate notch.
Cleaning and care
14