Handset, handsfree and headset modes – Mitel SIP USER AND ADMINISTRATOR GUIDE 5320 User Manual
Page 32

5320/5330/5340 SIP User and Administrator Guide
26
4. Press
(UP) and
(DOWN) to navigate through the logged call entries.
5. When the desired entry appears, press Delete. CONFIRM DELETE? appears.
6. Press
Yes. The log is deleted.
7. Press
MENU
to return to the default display.
Call a Call Logs Entry
• See Dial by Call Logs Entry on page 18 to quickly dial a Call Logs entry.
Handset, Handsfree and Headset Modes
Switch between Handset and Handsfree
To go from handset to handsfree mode:
1. Press (SPEAKER).
2. Hang up the handset. Use the handsfree speaker to communicate with your party.
To go from handsfree to handset mode:
• Lift the handset, and use it to communicate with your party.
Switch between Handset and Headset
To go from handset to headset mode:
1. Press
the
Headset key. The Headset key light turns ON.
2. Hang up the handset. Use the headset to communicate with your party.
To go from headset to handset mode:
1. Lift the handset.
2. Press
the
Headset key. The Headset key turns OFF. Use the handset to communicate with
your party.
Switch between Headset and Handsfree
To go from headset to handsfree mode:
• Press
the
Headset key, and then press
(SPEAKER). The Headset key turns OFF. Use
the handsfree speaker to communicate with your party.
To go from handsfree to headset mode:
• Press
the
Headset key. The Headset key turns ON. Use your headset to communicate with
your party.