Marantz LN9101M - Manual (Page 3)

3
Technical Assistance
If at any time you have questions about your Marantz
product, contact your Marantz Dealer who is familiar
with your Marantz equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all Marantz
products at:
Marantz America, Inc.
100 Corporate Drive
Mahwah, N.J. 07430-2041
Tech & Operational Support hours:
9:00 AM to 5:00 PM ET, M-F
Tel. 800-654-6633 Toll Free
Tel. 201-762-6666
Fax. 201-762-6687 Parts
If it is determined that your Marantz product is in need
of repair, you can return it to your Dealer. You can
also return it to the Marantz Service Department. For
assistance on factory repair return procedure, contact
the Marantz at:
Marantz America, Inc.
100 Corporate Drive
Mahwah, N.J. 07430-2041
General Office hours:
8:30 AM to 5:30 PM ET, M-F
Tel. 201-762-6500
Fax. 201-762-6670
Copyright 2007 © by Marantz America, Inc.
ADDITIONAL SAFETY
INSTRUCTIONS!
WARNING:
THERE IS A POSSIBILITY OF SERIOUS
INJURY IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS.
When mounting the projector to a building
structure, it is important to follow all of the local
building/construction codes. The total weight of
the Marantz VP-11, LN9101M Anamorphic Lens
System and MT20/EXT10 Mounting Brackets is
80 lbs (36.29 kg). Make sure the ceiling structural
members can support five times the total weight,
which is 400 lbs (181.44 kg).
Proper installation procedure by qualified
personnel as outlined in this installation guide is
required. It is recommended that the Profession-
als at your Marantz Dealer, who are skilled in all
aspects of installation and operation, install the
Marantz Video System and any associated audio
equipment.
It is important to read this LN9101M Instal-
lation Guide and the VP-11 User Guide before
starting the installation process. The instructions
in this Installation Guide must be adhered to as
failure to do so could result in serious injury.
To prevent possible damage to the Lens As-
semblies, DO NOT at any time attempt to LIFT,
CARRY or RE-ORIENT the equipment using the
Lens.
A. Do not remove the cover from the equip-
ment.
B. Do not remove lens covers until instructed to
do so.
C. Do not insert anything into the equipment
through the ventilation holes.
D. Do not handle the mains lead with wet
hands.
E. No naked flame sources, such as lighted
candles, should be placed on the equipment.
F. Do not look into the lens when the projector
is turned on. It could damage your eyesight.
G. When disposing of used batteries, please
comply with governmental regulations or
environmental public instructions rules that
apply in your country or area.
Customer Service