Miller Electric 350MPa - Manual (Page 6)

Industrial MIG 4/0 Kit with Dinse
Connector #300 405
This useful pulse-ready MIG kit can be
purchased separately. Includes Smith
®
flowmeter/regulator with 10 ft (3 m) gas
hose, 10 ft (3 m) 4/0 feeder weld cable with
Dinse connector on one end and a lug on
the other, 15 ft (4.6 m) work cable with
Dinse connector on one end and 600-amp
C-clamp on the other.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity revers ing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp recepta cle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
Running Gear
MIGRunner ™ Cart
#195 445
Small footprint
and easily
maneuverable,
with cylinder
rack low enough
that you do not
have to lift bottles.
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas
cylinders, or one
gas cylinder and
one coolant
system for TIG
(GTAW) welding.
Feeder mounts to
tray above power
source.
Universal
Carrying Cart and
Cylinder Rack
#042 934
Holds power
source, and gas
cylinder up to 56 in
(142.2 cm) high
mea sur ing 6 to 9 in
(15.2 to 22.8 cm)
in dia meter.
Protective Cover
#195 478
Mildew and water resistant, odor-free
cover protects your machine’s finish.
For 300/350 A inverters: Invision, XMT,
Maxstar and Dynasty.
Wire Feeders/Guns
70 Series
S-74 MPa
#300 411*
S-74S #195 057
S-74D #195 058
S-74DX #195 059
Wire feeder features Posifeed ™ wire drive
assembly and handles a variety of wires up to
1/8 in. Comes with FREE Bernard
® Q ™ -Gun.
See Lit. Index No. M/3.0.
*Designed exclusively for Invision 350 MPa for
Synergic Pulsed MIG benefits.
XR ™ -Control #181 538
Push-pull wire feed
system offers
unparalleled performance
for aluminum MIG
welding. See Lit.
Index No. M/1.7.
XR ™ -Aluma-Pro ™ Gun *
#300 000 15 ft (4.6 m) air-cooled
#300 001 25 ft (7.6 m) air-cooled
#300 264 35 ft (10.6 m) air-cooled
#300 003 15 ft (4.6 m) water-cooled
#300 004 25 ft (7.6 m) water-cooled
#300 265 35 ft (10.6 m) water-cooled
This easy-to-use and easy-to-maintain
gooseneck-style MIG gun is designed for
push-pull wire feed systems (with required
XR-Control). Available in air- or water-
cooled versions. Trigger hold reduces
operator fatigue (feature available when
paired with XR-Control). Gun design allows
for better access into tight spots. See Lit.
Index No. M/1.7.
*XR-Control is required to operate this gun with
the Invision 350 MPa System.
6
Genuine Miller Accessories