Miller Electric 350MPa - Manual (Page 7)

22A #193 066
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Accommodates up to
60 lb (27.2 kg) spool of welding wire when
using optional wire reel assembly. Comes
with FREE Bernard
® Q ™ -Gun! See Lit. Index
No. M/11.0.
24A #195 112
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Remote voltage is
standard. Features four gear-driven drive
rolls for larger wire sizes. Accommodates
up to 60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
Comes with FREE Bernard
® Q ™ -Gun! See
Lit. Index No. M/11.0.
Spoolmatic ® 30A #130 831
A 1-lb, air-cooled spool gun that extends
the weld process range by adding a handy
portable system for small wire MIG. Rated
200 A at 100% duty cycle. Includes 30 ft
(9.1 m) cable assembly. (WC-24 #137 549
for 14 pin.)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin recep tacles. For
use with Spoolmatic
30A spool gun.
Water Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Coolmate ™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolmate ™ V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate ™ 4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
International-Style Connectors
Note: Invision 350 MPa power sources are
equipped with International-style connectors for
secondary connections.
International/Tweco ®
Adapter #042 465
International/Cam-Lok
Adapter #042 466
One-piece adapter with International-style
male plug (to power source) on one end and
female receptacle (Tweco or Cam-Lok for
weld cable connection) on other end.
International-Style Connector Kit
#042 418 50 mm
Accepts #4 or #1/0 AWG cable size.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
recep tacles on the power source.
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #4 or #1/0 AWG cable size.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Used to adapt or extend weld and/or work
cables. Kit includes one male International-
style plug and one in-line female
International-style receptacle.
Genuine Miller Accessories
(continued)
7