Multi-Tech Systems MT5600DSDV2 - Manual (Page 13)

MultiModemDSVD User Guide 2 Installation
13 Multi-Tech Systems, Inc.
J10
J10 Speaker Mode
Closed: stereo (default)
Open: mono
Figure 2-2. Location of speaker jumper. (MT5600DSDV only)
Changing the Speaker Jumper
The speaker jumper (J10) is behind the internal speaker near the external speaker
jack (see Figure 2-2).
• To use the MultiModemDSVD with a monophonic external speaker, remove the
jumper plug from the J10 jumper pins. You can store it by placing it on one
jumper pin.
• To use the MultiModemDSVD with a stereo speaker or sound card, place the
jumper plug on both pins of the J10 jumper. This is the factory default position.