Miller Electric NT 456 CC - Manual (Page 18)

OM-2243 Page 14
4-4. Selecting A Location
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3
Rating Label
Use rating label to determine input
power needs.
4
Line Disconnect Device
Locate unit near correct input pow-
er supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
4
18 in
(460 mm)
18 in
(460 mm)
OR
1
2
Movement
Location
3