Marantz SR6400 - Manual (Page 11)

8
ENGLISH ¤1 TEST button
(when AMP mode is selected)
Used to enter the test tone menu.
¤2 MENU/OSD button
(when AMP mode is selected)
When this button is pressed, the current setting is
displayed on the TV monitor.
¤3 VOLUME / buttons
Used to adjust the volume on receivers.
¤4 P.SCAN (preset scan) button
(when TUNER mode is selected)
Used to start preset scan when SR6400 is selected
TUNER mode.
¤5 MUTE button
Muting button of the SR6400. Press this button
decrease the sound temporarily . Press this button
again to return to the previous sound.
¤6 MEMO button
Memory enable button for various preset functions.
¤7 NIGHT button
(when AMP mode is selected)
Pressing this button prevents the Dolby Digital sig-
nal from playback at a loud voice. This function re-
duces the voice by 1/3 to 1/4 at maximum. Thus, it
eliminates the occurrence of an abruptly loud voice
at night. However, the function is valid only in the
case when the Dolby Digital signal is entered into
OPTICAL or COAXIAL and data to compress the
voice exists in the signal to be played back.
When this button is pressed, the “NIGHT” indicator
is illuminated.
¤8 PTY button (European model only)
(when TUNER mode is selected)
Used to display the program type information of
the current station. The RDS system categorizes
programs according to their genre into different
(PTY) groups.
LCD (Liquid Crystal Display)
Information about currently selected functions and
modes are displayed on the LCD screen.
a Function Name indicator
Displays the name of the currently selected
function (DVD, TV, etc.) using up to 5 characters.
b LEARN indicator
Indicates when the remote control is in the LEARN
mode.
c USE indicator
For normal operation the USE indicator is displayed.
d MACRO indicator
Indicates when the remote control is in the MACRO
mode.
e Transmission indicator
Indicates when the remote control is transmitting a
signal.
f Low battery indicator
When this indicator appears, the batteries should
be replaced.
a b c d f e
¤9 F.DIR/SEAR button
(when TUNER mode is selected)
Used to select the mode for frequency direct input.
‹0 DISP./RDS button
(when TUNER mode is selected: European
model only)
Selects display mode function for RDS (Radio
Data System).
(when AMP mode is selected)
Selects the display mode for the front display of the
SR6400.
‹1 A/D button
This is used to switch between the analog and
digital inputs.
‹2 SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can
be operated the same way as the button on the unit.
‹3 7.1/6.1CH IN button
Press this button to select the output of an external
multichannel decoder.
‹4 POWER ON, OFF buttons
(when AMP mode is selected)
Press to switch the power of the SR6400 ON or OFF.