Marantz SR6400 - Manual (Page 28)

25
ENGLISH
ENGLISH
BASIC OPERATION
(TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s
standard is 9 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
(Using the SR6400)
1. To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2.
F/P button on the front panel to display the
frequency.
3.
Press the TUNING or button on the front
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2. Press the 5 5 5 5 5 or 6 6 6 6 6 for more than 1 second on
the remote.
3. Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the “Manual tuning” operation.
MANUAL TUNING
(Using the SR6400)
1. To select tuner and desired band (FM or AM),
press the TUNER button on the front panel
2. Press the F/P (Frequency/Preset) button on
front panel, to have the frequency appear on the
display.
3. Press the TUNING or buttons.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the 5 5 5 5 5 or 6 6 6 6 6 on the remote to tune in the
desired station.
DIRECT FREQUENCY CALL
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2. Press the F.DIR on the remote, display will
show “FREQ - - - -”.
3. Input your desired station’s frequency with the
ten numbered keypad on the remote.
4.
The desired station will automatically be tuned.
DOWN MEMORY TUNING MODE R
MUTE
S-VID
DSS/VCR2 AUX VCR1 DVD CD CD-R TAPE TUNER
S-DIRECT DISPLAY A/D 6.1CH INPUT S A/B
F/P
3. 2. 1.
2.
1.
DOWN MEMORY TUNING MODE R
MUTE
S-VI
DSS/VCR2 AUX VCR1 DVD CD CD-R TAPE TUNER
S-DIRECT DISPLAY A/D 6.1CH INPUT S A/B
F/P
3. 2. 1.
2.
1.
(FM) TUNING MODE (AUTO STEREO OR MONO)
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The “ST” indicator is illuminsted when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
“TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the
station in stereo. In such a case, press the MODE
button on the front panel or press the T.MODE button
on the remote.
“AUTO” indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the “ST”
indicator is not illuminated.
To return to auto stereo mode, press the MODE
button or press T.MODE button on the remote again.
AUTO indicator is illuminated the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/AM stations
in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
1.
3.
2.
UP
VOLUME
DOWN G MODE
MUTE
AUX INPUT S-VIDEO VIDEO L AUDIO R
ATT
CD CD-R TAPE TUNER
S-DIRECT DISPLAY
F/P
AV SURROUND RECEIVER SR6400
UP
SELECTOR VOLUME
DOWN MEMORY TUNING MODE CLEAR
MUTE
POWER ON/STANDBY PHONES
ENTER
STANDBY AUX INPUT S-VIDEO VIDEO L AUDIO R
ATT SELECT
DSS/VCR2 AUX VCR1 DVD TV CD CD-R TAPE TUNER
S-DIRECT DISPLAY A/D 6.1CH INPUT SPEAKERS A/B
F/P
2.4. 2. 5. 1. 3.
1. To select FM , press the TUNER button on the
front panel.
2.
While pressing the MEMORY button, press
the TUNING
button up.
“AUTO PRESET” will appear on the display,
and scanning starts from the lowest frequency.
3. Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the TUNER button.
4. If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
TUNING
button during this period, this station
is skipped and auto presetting continues.
5. Operation stops automatically when all 50
preset memory positions are filled or when auto
scanning attains the highest end of all bands. If
you desire to stop the auto preset memory at
anytime, press the CLEAR button.
MANUAL PRESET MEMORY
(Using the SR6400)
1.
Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
2.
Press the MEMORY button on the front panel.
“– –“ (preset number) starts blinking on the
display.
3.
Select the preset number by pressing the
TUNING or
button, while this is still blinking
(approx. 5 seconds)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified preset
memory location.
RECEIVER SR6400
MEMORY TUNING M CLEAR
S
DSS/VCR2 AUX VCR1 DVD TV CD CD-R TAPE
S-DIRECT D A/D 6.1CH INPUT SPEAKERS A/B
F/P
2. 4. 3.
3.
2.