Maytag MD75 - Manual (Page 14)

13
C
ONTROLS AT A
G
LANCE CONT
.
Touch the up or down arrow to
set the time to tumble. The
time will increase or decrease
by one minute increments.
Press
“Continue” when done.
wrinkle release
18 minutes
regular
temperature
options
Press "start/pause" or
change your selection below.
Time
continue
18
minutes
Touch the appropriate tempera-
ture for the load.
wrinkle release
18 minutes
Press "start/pause" or
change your selection below.
regular
temperature
options Temperature
regular medium
delicate extra low
Options Screen – The following options may be added
to customize your Wrinkle Release Cycle:
• “Wrinkle Prevent”
• “End of Cycle Chime”
• “Remind Chime”
See page 7 for a detailed description of these options.
When the desired selections are made,
touch
“Continue” to see the review screen once again.
loud end
of cycle chime
Options
continue
Touch “More Cycles” on the
Home screen.
Step 1
S
ETTING
F
RESHEN
U
P
sensor dry
Home
time dry
more cycles
air fluff
(no heat)
favorites
Freshen Up – the Freshen Up cycle is designed to activate a fabric softener sheet. There is 5 minutes of heated tumble followed by
10 minutes of tumble in unheated air.
Add a fabric softener sheet to the
load. Select “Freshen Up”.
Step 2
wrinkle release
More Cycles
freshen up
Dryel ®
Review Screen – The default settings for Freshen Up are
15 minutes of tumble using extra low temperature heated
air. You may press Start/Pause to begin Freshen Up or
select any of the areas on the touchscreen to further cus-
tomize the Freshen Up cycle.
Step 3
freshen up
15 minutes
extra low
temperature
options
Press "start/pause" or
change your selection below.
Touch the up or down arrow to set
the time to tumble. The time will
increase or decrease by one minute
increments.
Press “Continue”
when done.
freshen up
15 minutes
Press "start/pause" or
change your selection below.
extra low
temperature
options Time
continue
15
minutes
Touch the appropriate tempera-
ture for the load.
freshen up
15 minutes
Press "start/pause" or
change your selection below.
extra low
temperature
options Temperature
regular medium
delicate extra low
Touch the appropriate options then press “Continue”.
loud end of
cycle chime
Options
continue
remind chime
on off