Step 1 step 2, Step 4 step 5, Step 6 – Maytag MD75 User Manual

Page 8: Ontrols at a, Lance, Cont

Advertising
background image

7

Select “Time Dry” from the Home screen. The control defaults to
45 minutes.

Step 1

Step 2

time

45 min

Press "start/pause" or

change your selection below.

regular

temperature

options

cycle chime loud

remind chime ON

Time

continue

45

minutes

Press the up and down arrows to set the appro-
priate number of minutes to dry the load. The time
will increase or decrease in one minute increments.
Press “Continue” when done.

sensor dry

Home

time dry

more cycles

air fluff

(no heat)

favorites

S

ETTING

T

IME

D

RY

time

45 min

Press "start/pause" or

change your selections below.

regular

temperature

options

cycle chime loud

remind chime ON

C

ONTROLS AT A

G

LANCE

CONT

.

Review Screen – The Review Screen lists the selected
settings. At this point you may press Start/Pause to
begin drying the load or select “Options” for further
customization of the drying cycle.

Options Screen – The option choices on the left
turn the options on or off. The option choices on
the right show an additional screen with multiple
choices. The following options may be added to cus-
tomize your Sensor Dry cycle:
“Wrinkle Prevent” - Intermittent tumble in

room temperature air for up to two hours fol-
lowing the dry cycle.

“Damp Dry Chime” - Chimes when load is

damp.

“Remind Chime” - Chimes at the end of the

cycle every 5 minutes for up to two hours.

“End of Cycle Chime” - Chimes once when the

selected dryness level is reached.

When the desired selections are made, touch
“Continue” to see the review screen once again.

Step 4

Step 5

dryness level

normal dry

Press "start/pause" or

change your selection below.

regular

temperature

options

cycle chime loud

remind chime ON

loud end

of cycle chime

Options

continue

Review Screen – The review screen will appear
once again to verify your selections. If they are
correct, press Start/Pause. If they are incorrect,
press the area you would like to change.

Step 6

dryness level

normal dry

Press "start/pause" or

change your selection below.

regular

temperature

options

cycle chime loud

remind chime ON

Special Note: As you use the touchscreen,
if you feel you are lost, press Back or Home.

Advertising