Memorex MVDP1077 - Manual (Page 18)

The Setup menu lets you customize the DVD player by allowing you to select
various language preferences, set video/audio settings, adjust what type of
television screen you have and more.
Use the following instructions to navigate and change the options as described on
the upcoming pages.
1. Without a disc inserted and with the
disc compartment cover closed, press
the SETUP button 1 to enter the Setup
menu.
2. Select one of the Setup icons at the
top of the screen using the Navigation
(√,®) buttons 2, then press the
Navigation (†) button 2 to select it.
3. Use the Navigation (π,†) buttons 2 to
select one of the Setup options, then
press the SELECT button 3 to select it.
4. Use the Navigation (π,†) buttons 2 to
change the desired setting, then press
the SELECT button 3 to make the
change.
5. Exit by pressing the SETUP button 1
again or select EXIT SETUP and press
the SELECT button 3.
NOTE:
• Slide the POWER switch (on the main unit) to turn the unit on; the ON/
STANDBY indicator will light green. When the unit is on, if you press the
POWER ON/STANDBY button (on the remote), the unit will turn to the Standby
mode; the ON/ STANDBY indicator will light red. To reduce the unit’s power
consumption, slide the POWER switch (on the main unit) to turn the unit off; the
ON/STANDBY indicator will turn off.
17
SETUP MENU
+10 0
7
4
1
8
5
2
9
6
3
1/ALL
TITLE
AUDIO
F.BWD
ANGLE ZOOM
F.FWD PREV NEXT
SEARCH PROGRAM
PAUSE/STEP SLOW
SELECT
POWER DISPLAY SETUP TFT SET
REPEAT
MENU
SUBTITLE PLAY STOP
CLEAR
VOLUME
2
1
3