Output terminal panel familiarization – Multiquip MQ MultiQuip Power DCA85USJ2 User Manual
Page 38
                                    Advertising
                                    
                                        
                                    
                                
                                
PAGE 38 — DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11)
OUTPUT TERMINAL PANEL FAMILIARIZATION
OUTPUT TERMINAL PANEL
The Output Terminal Panel (Figure 7) shown below is 
located on the right-hand side (left from control panel) of 
the generator. Lift up on the cover to gain access to 
receptacles and terminal lugs.
NOTICE
Terminal legs “O” and “Ground” are considered bonded 
grounds.
OUTPUT TERMINAL FAMILIARIZATION
The “Output Terminal Panel ” (Figure 6) is provided with 
the following:
 Three 120/240V output receptacles @ 50 amp
 Three Circuit Breakers @ 50 amps
 Two 120V GFCI receptacles @ 20 amp
 Two GFCI Circuit Breakers @ 20 amps
 Five Output Terminal Lugs ( U, V, W, O, Ground)
Figure 7. Output Terminal Panel
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: