Marantz VC5400 User Manual

Page 12

Advertising
background image

Connections (Continued)

Connecting to Optional Equipment

(Contimued)

Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital)

This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.

11

Connect the CENTER and SUB WOOFER jacks for
the Center speaker and the Subwoofer (C) to the
corresponding in jacks on your receiver.

2

2

Connect the Left and Right FRONT speaker jacks
(F) to the corresponding in jacks on your receiver.

3

3

Connect the Left and Right REAR speaker jacks
(R) to the corresponding in jacks on your receiver.

4

4

Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu.
See page 30.

Notes

– Refer to the owner’s manual of your audio system as

well.

– Before you connect the DVD player to other equip-

ment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any
connections.

– If you place the DVD player near a tuner or radio, the

radio broadcast sound might be distorted. In this
case, move the DVD player away from the tuner and
radio.

– The output sound of the DVD player has a wide

dynamic range. Be sure to adjust the receiver’s vol-
ume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume
sound.

– Turn off the receiver before you connect or disconnect

the DVD player’s power cord. If you leave the receiv-
er power on, the speakers may be damaged.

– When playing DTS-encoded discs (DVD video discs

and audio CDs), excessive noise may be output from
the analog stereo jacks.
To avoid possible damage to the audio system, you
should take proper precautions when the AUDIO OUT
jacks of the DVD video player is connected to an
amplification system. To enjoy DTS Digital Surround
playback, an external 5.1 channel DTS Digital
Surround decoder system must be connected to the
DIGITAL OUT jack of the DVD video player.

Caution

Do not set the Digital Audio Output of this DVD
player to “Dolby Digital” unless you are connecting
the DIGITAL OUT jack of this DVD player to an AV
decoder that has the Dolby Digital decoding func-
tion. High volume sound may damage your hearing
as well as the speakers.

12

ANALOG 5.1CH

AUDIO INPUT

Front L

Rear L

Front R

Rear R

Center

Subwoofer

Amplifier (Receiver)

Rear of DVD player

R

C

F

Advertising