Motorola WE800G - Manual (Page 17)

SECTION 1 OVERVIEW
1-12 SECTION 1, OVERVIEW
LED Description
The underlined items represent network activity.
LED Condition Color Status
1. Power ON Green The device is powered on and operating normally.
Blinking Green Firmware update is in progress.
Blinking/ON Red The power LED turns red as soon as the reset button
is depressed.
If the reset button is held down for more than five
seconds, the LED starts to blink, during which time
the Wireless Ethernet Bridge’s default user name,
password, and IP address will be restored. The LED
then turns off until the reset button is released.
The power LED keeps blinking red if the firmware is
corrupted, indicating the firmware needs to be
restored.
2. Wireless OFF None No mobile station or AP has associated with this
device.
ON Red The wireless interface has been disabled by the
firmware.
ON/Blinking Green Connection exists in this wireless domain/active
traffic present.
3. Device OFF None No external Ethernet device has been attached and
detected. The Ethernet link is down.
ON/Blinking Amber 10BaseT link detected/active traffic present.
ON/Blinking Green 100BaseT link detected/active traffic present.