Windows 2000 dhcp server configuration, Configuring windows xp – Motorola WE800G User Manual
Page 32
Advertising
INSTALLATION
SECTION 2
SECTION
2,
INSTALLATION
2-15
Windows 2000 DHCP Server Configuration
After your initial configuration has been completed, you may need to
setup your PC for using a DHCP server, using the procedure below.
1 Follow Steps 1 through 8 from above.
2 Select Obtain an IP address automatically.
3 Click OK and then complete the procedure by following steps 11
and 12.
Configuring Windows XP
This configuration assumes you have retained the default interface
for Windows XP. If you are running the ‘Classic’ interface, please
follow the instructions for Windows 2000.
1 Click Start.
2 Select Settings.
3 Select Control Panel.
4 Double-click Network and Dial-Up Connections.
Advertising