Motorola WE800G - Manual (Page 24)

INSTALLATION SECTION 2
SECTION 2, INSTALLATION 2-7
Easy Software Setup
Run the Installation Wizard program from the supplied CD-ROM to
quickly setup your network. Once your network is up and running,
refer to Section 3:Configuration for advanced configuration.
Manual Software Setup
If you’d prefer to manually setup your network, use this section to
configure it. This section describes the physical connection of the
Wireless Ethernet Bridge to your network as well as the configuration
needed by your PC.
To set up your wireless network:
! Physically connect and power on the Wireless Ethernet Bridge
! Configure your PCs
! Enter Wireless Security settings
If you don’t want to use the Installation Wizard from the CD-ROM,
follow the instructions below. For advanced configurations, refer to
Section 3:Configuration.