Mocomtech CRS-300 - Manual (Page 179)

CRS-300 1:10 Redundancy Switch Revision 16
Connector Pinouts MN/CRS300.IOM
6–11
6.2.10 Quad E1 – RJ-48F Connectors (CRS-365)
Table 6-13 indicates the pinout for the four (4) RJ-48F TMI User Data Interface connectors
(Quad E1): Ports 1 through 4 on the CRS-365.
Table 6-13. Quad E1 Connector (Typical Ports 1 through 4)
Pin #
Name
(where Port # = Port 1, 2, 3 or 4)
Direction
1 Port # Tx+ In
2 Port # Tx– In
3 Gnd --
4 Port # Rx+ Out
5 Port # Rx– Out
6 Gnd --
7 NC --
8 NC --
TMI User Data Interface:
Quad E1 connectors