Miller Electric 375 - Manual (Page 17)

OM-2229 Page 13
16 in
(406 mm)
4-5. Selecting A Location
loc_2 3/96 - Ref. 802 784-B / 802 785-A / 802 786-B / 209 098 / 203 892-A
1 Lifting Handle
Use handle to lift unit.
2
Hand Cart
Use cart or similar device to move
unit.
3
120 VAC Receptacle
To connect unit to 230 VAC input
power, a customer supplied plug is
necessary (see Section 4-9).
Locate unit near correct input
power supply.
Y Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
8-1/2 in
(216 mm)
12-5/16 in*
(313 mm)
Movement 1
2
Location And Airflow
Dimensions And Weight
49 lb (22.2 kg)
not including torch
10 in
(254 mm)
10 in
(254 mm)
3
*Add 13/16 in (21 mm) for handle.
.
Serial Number/Rating Label located on
rear panel of plasma cutter; use label to
determine input power for unit.