McCulloch Euromac D321/34cc - Manual (Page 17)

11
A FAULT FINDING TABLE
Engine will Engine runs badly
The machine
not start
or looses power runs but does
when cutting not cut well
•
•
•
• •
• •
•
•
•
•
Engine still gives trouble: contact your dealer.
Check STOP switch is in the
position I.
Control fuel level min. 25%tank
capacity.
Check air filter is clean.
Remove spark plug, dry it, clean it
and adjust it, and replace it, if
necessary.
Control and adjust the carburetor
screws if necessary.
Change fuel filter. Contact your
dealer.
Carefully follow the cutting
accessory assembly instructions.
Check metal cutting accessory is
sharp. Otherwise, contact your
dealer.
1-30 cabrio 320-380-248729 29-11-2001 14:38 Pagina 11