Marantz CDR510 - Manual (Page 8)

Features
The CDR510 incorporates a suite of professional
features for audio input, audio output, loop out, remote
control, recording modes, finalizing, CD-Text entry and
play back, automatic track incrementing, minute track
incrementing, play back track selection: single track,
scan play, programmed play, random play, and repeat
play.
Audio input (CDR drive)
• balanced XLR L and R inputs
• analog RCA line level
• digital RCA (SPDIF)
• digital optical (fiber-optic cable)
Audio output (CD drive)
• analog RCA line level
• digital RCA (SPDIF)
Audio output (CDR drive)
• analog RCA line level
• digital RCA (SPDIF)
• loop out digital RCA (SPDIF) (cascade recording)
Remote control (CDR drive and CD drive)
• full featured IR remote control
• RC-5 via RCA jacks, input and output
• RS-232C for external control
Recording modes
(CDR drive recording from the CD drive)
• RECORD FAST - double speed recording
• REC LISTEN - 1X recording enables listening to a
recording while making it.
• MAKE CD - double speed recording with auto-
matic finalizing
• REC MP3 DISC - same as REC LISTEN when
recording data from an MP3 disc to a CD audio
disc
(CDR drive recording from external sources)
• REC EXT DISC - automatically record an external
source by starting the source (SYNC recording)
• REC EXT MAN - manually start recording from an
external source (manual start recording)
• MINUTE TRACK - automatically start a new track
every minute (enables easy play back search of a
recording session)
• ONE TOUCH RECORD - The last selected
recording mode is remembered even after power
off. You can begin recording in the last selected
record mode simply by pressing the Record button
on the CDR510 or IR Remote.
- 8 -
Finalizing/erasing
• finalizing can be automatic (MAKE CD) or manual
• the CDR drive or CD drive can play an unfinalized
disc
• a CD-RW disc can be unfinalized
• a CD-RW disc can be erased either the entire disc
or one or more tracks from the end
CD-Text
• CD-Text can be read and displayed by either drive
• CD-Text can be entered on the CDR drive
• in some recording modes, CD-Text on a source is
automatically recorded
Track incrementing
The CDR drive can be set to automatically increment a
track:
• based on the input signal
• based on a silence gap
• every minute
• or track incrementing can be done manually during
recording by pressing the TR. INC. button on the
IR remote or the Record button on the CDR510
or the IR Remote
Play back – CDR and CD drives
• Standard audio CDs
• CD-R or CD-RW discs
• unfinalized CD-R or CD-RW discs
• CD drive only, finalized MP3 data discs
Play back track selection
• Single track: one track plays and the CDR510
stops at the beginning of the next track
• Scan Play: plays the first 10 seconds of each track
• Programmed play: plays tracks according to a
programmed order you preset
• Random play: all tracks on both drives are ran-
domly played
• Repeat play: the current track or all tracks are
repeated