Motorola Canopy Powerline MU - Manual (Page 71)

Powerline MU
Page 71 of 112
•
Modem 1, Modem 2, and Gateway have the same NEK.
Figure 49 Typical Set Up for the Modem Repeater
Procedure:
To connect Modem 2 to the Gateway, first enable Modem 1 as a Repeater (see Figure
50).
Figure 50 Operating Mode (Repeater)
Procedure:
•
Log into Modem 1 and open the “Operating Mode” menu on the left hand panel.
•
Select the radio button for “Repeater Mode.”
•
Enter the MAC address of Modem 2 into the text input box. Select Apply.
•
Log into Modem 2, and open the “Operating Mode” menu on the left hand panel.
•
Select the “Use with Repeater” radio button and select Apply.
Note: Modems will reboot when changing the Operating Mode.