Motorola Canopy Powerline MU - Manual (Page 96)

Powerline MU User Guide March, 2007
Issue 2.0 Page 96 of 112
Powerline MU Gateway
•
Injects the Internet signal into the
building’s electric distribution
•
Performs Ethernet to Powerline
conversion
•
Ethernet input connects to Canopy
Subscriber Module or other broadband
source
•
Four port Ethernet Switch
•
Three Powerline outputs connect to
three electrical phases via capacitive
coupling cables (3 feet in length)
•
QoS Support: Maps Ethernet QoS to Powerline QoS using VLAN priority
•
Bandwidth management for service class differentiation
•
Using BAM (Bandwidth Authentication Manager) provides authentication for associated
Powerline Modems within its network
•
Plugs into a standard AC power outlet with 6 foot power cord
•
Additional plug types available upon request
Part Number Type A (US) Plug: 0171486N11
Type C Plug: 0171486N04
Type G Plug: 0171486N19
Product Name Motorola Powerline MU Gateway
Description Head End Controller Equipment in a Powerline MU solution
Modulation Type: OFDM, QAM 256/64/16, DQPSK, DBPSK and ROBO mode
(FSK)
Power Input: 100 – 240 VAC, 50/60 Hz
Power Consumption: 7 Watts
Network Management: SNMP v2c
Powerline Interface HomePlug v 1.01 Turbo
Data Interface Ethernet IEEE 802.3 10/100 Base T
Powerline Encryption 56 bit DES
Connectors 5 RJ45, 3 AC coupling connections, Input power (plug Types
A, C, G available)
LED Status Lights WAN, 4 LAN, Power on, PLC, Collision
Dimensions 1.75 in. x 17.3 in. x 7.98 in. (4.44 cm x 44.0 cm x 20.3 cm)
Weight 5.99 lbs (2715 g)
Operating temperature: 0°C to 50°C (32°F to 122°F)
Safety UL/cUL/CE
Industry Canada ICES-003 Class B
EN EN55022 CE 0682 Class B
FCC Part 15 Class B
Available Now!