Marantz SR9200 - Manual (Page 11)

7
ENGLISH
FL DISPLAY
k ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or
DTS 5.1ch, “L”, “C”, “R”, “LS”, “RS” and “LFE” will light up.If the digital
input signal is 2 channel PCM-audio, “L” and “R” will be displayed.
If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal
comes in, “L”, “C”, “R”, “LS”, “S” , “RS” and “LFE” will show.
l Main Information Display
This display shows messages relating to the status, input source,
surround mode, tuner, volume level or other aspects of unit’s
operation.
¡0 Multi-room system indicator
MULTI : This indicator lights when the multi-room system is active.
SLEEP : This indicator lights when the sleep timer to multi-room
system is active.
M-SPKR : This indicator lights when the Multi-room Speaker output
is active.
¡1 TUNER’s indicators
ST(Stereo) : This indicator illuminates when an FM station is being
tuned in stereo condition.
AUTO : This indicator illuminates when the tuner’s Auto mode
is in use.
TUNED : This indicator illuminates when a station is being
received with sufficient signal strength to provide
acceptable listening quality.
TUNED
AUTO
MULTI
SLEEP
M-SPKR
ST
DISP
PRO LOGIC PRO LOGIC MOVIE MUSIC
MUSIC CINEMA
DIRECT
TEST
AUTO SURR
COPY
THX SURR EX
NIGHT
DISC 6.1 MTX 6.1
SLEEP
ATT
PEAK
DIGITAL
ANALOG
DIGITAL
SURROUND
96kHz
OTHER PCM
L C R
SL S SR
LFE
TUNED
AUTO
MULTI
SLEEP
M-SPKR
ST
DISP
PRO LOGIC PRO LOGIC MOVIE MUSIC
MUSIC CINEMA
DIRECT
TEST
AUTO SURR
COPY
THX SURR EX
NIGHT
DISC 6.1 MTX 6.1
SLEEP
ATT
PEAK
DIGITAL
ANALOG
DIGITAL
SURROUND
96kHz
OTHER PCM
L C R
SL S SR
LFE
l
k j h g f d s a
¡9 ™0 ¡8 ¡6 ¡7
¡5 ¡4 ¡2 ¡3 ¡1
¡0
a DISP (Display Off) indicator
This indicator lights when the SR9200 is in the display off condition.
s PRO LOGIC II mode indicators (MOVIE,
MUSIC, PRO LOGIC)
These indicators illuminate when one of the Dolby Pro Logic II modes
is in use.
d Circle Surround mode indicators
(CINEMA, MUSIC)
These indicators illuminate when one of the Circle Surround modes is
in use.
f ATT (Attenuation) indicator
This indicator lights when the attenuation function is active.
g DIGITAL Input Indicator
This indicator lights when digital input has been selected.
h ANALOG input indicator
This indicator lights when an analog input source has been selected.
j SIGNAL FORMAT indicators
2 DIGITAL, 2 SURROUND, dts, ES, PCM, 96kHz, HDCD, and
OTHER
When the selected input is a digital source, some of these indicators
will light to display the specific type of signal in use.