Marantz SR9200 - Manual (Page 21)

17
ENGLISH
SECOND SETUP PAGE
On the second setup page you can adjust:
• the date;
• the time.
Adjust the Date
You can set the year, the month and the day in the date settings.
Press “+” to increase or “–” to decrease the value for the year, month
and day.
1.
Tap “ + ” or “ – ” once to adjust the year, month and day one value up
or down.
2.
Press and hold “ + ” or “ – ” to adjust the values for the year and the
month more rapidly. The value for the day settings will change per
5 days.
The RC3200A will immediately reflect the date change at the top of the
screen.
Adjust the Time
1.
Tap “ + ” or “ – ” once to adjust the time 1 minute up or down.
2.
Press and hold “ + ” or “ – ” to adjust the time more rapidly. The time
will increase or decrease per 30 minutes.
The RC3200A will immediately reflect the time change at the top of the
screen.
THIRD SETUP PAGE
RC3200A Information
This page contains information that may be important to the dealer in
case of a defect.
The following information is displayed on this screen:
• Free memory (in percentage), which gives you an indication on how
much memory is left to (further) customize the RC3200A;
• Boot version;
• Application version;
• Configuration file.
Revert
Warning
• When you revert the RC3200A, all customization is lost
permanently. You loose all RC3200A settings learned codes
and recorded macros.
By tapping the Revert button the RC3200A will be reverted to the
default configuration.
Reverting to the original configuration restores the RC3200A to its
initial state.
You might have to revert when you notice that scrolling through pages
is slowing down. This might be the case when you have added a lot of
commands to the RC3200A.
1.
Tap the Revert button.
A message screen appears to confirm or cancel the revert
process.
2.
Press OK or Cancel .
TO EXIT SETUP MODE
1.
Press the Mode button.
The Mode screen appears.
2.
Tap the Mode button you want to go to.
RC3200A switches to this mode. See also “Working with Modes”.