Marantz SR9200 - Manual (Page 24)

20
ENGLISH
13.
Press Stop to stop recording. A message screen appears.
14.
Press OK to save the macro and return to the Mode screen.
The existing command of the selected button is replaced by the
macro or press
Cancel to return to the Mode screen without
saving the macro.
The button retains its previous command.
15.
Set the RC3200A in Use mode to test the recorded macro.
RC3200A EDIT
If you want to personalize your RC3200A even more beyond its
standard programming features, RC3200edit is the tool for you to use.
You can find more information and updates of the software on http://
www.marantz.com.
RC3200edit is the visual editor for creating and configuring RC3200A
Configuration Files (NCF) on your computer. An NCF is a file that is
used to define the RC3200A behaviour and look for the LCD touch
screen.
Note
• It is advised to make backup copies of your own configurations.
This can be done with RC3200edit.
With RC3200edit you can:
• generate the Home Screen;
• design the page layout and the appearance of buttons;
• configure the behavior of the hard buttons and soft buttons;
• access RC3200edit's extended help system by pressing F1.
• save, duplicate and share NCFs, devices, buttons, bitmaps or
codes with another RC3200A;
• preview the NCF on the RC3200emulator;
• download the new configurations to your RC3200A by means of the
included serial cable;
1.
Plug one end of the serial cable in the serial port on your
computer.
2.
Plug the other end of the serial cable in the serial port on the
RC3200A.
Note
• When the RC3200A is connected to the PC, the battery lifetime
may be reduced.
MINIMUM SYSTEM REQUIREMENTS
• PC with a Pentium 166 MHz or higher
• Windows 95/98/ME/XP or NT 4.0/2000
• 32 MB of RAM
• 16 MB of free hard disk space
• Free serial port
• Microsoft and Windows are trademarks of the Microsoft
Corporation of the U. S. A. and are registered in the U. S. and
other countries.
• Pentium is trademarks of Intel Corporation in the United States
and other countries.