Multi-Tech Systems FR3060 - Manual (Page 16)

16
MultiFRAD 3000-Series User Guide
2 Connect the MultiFRAD to the COM port on a PC. Plug the DB-25 male end of your serial
cable from your PC into the Command Port connector on the back of the MultiFRAD.
3 Connect one end of an DB-25 (female) cable to the Ext. Composite Link Connector on the
back of the MultiFRAD (as shown in Figure 3). Connect the other cable end to your T1 CSU/
DSU or compatible link device.
4 If you are connecting to a LAN, make the network connection by connecting an RJ-45 (UTP)
cable to the 10 BASE-T Ethernet connector (shown in Figure 3) on the back of the
MultiFRAD. Connect the other end of the cable to your LAN.
Data Channel Cable Connections
5 Connect one end of a DB-25 cable to one of the data channel connectors on the back of your
MultiFRAD (labeled CHANNEL 1-6 for the FR3060, CHANNEL 1-10 for the FR3100). See Figure
4. Connect the other end of each cable to the channel device. Repeat for each of the up to 6
or 10 channels you are connecting.
E&M FXO FXS E&M FXO FXS E&M FXO FXS E&M FXO FXS
VOICE/ FAX CHANNEL 8
VOICE/ FAX CHANNEL 4
VOICE/ FAX CHANNEL 7
VOICE/ FAX CHANNEL 3
VOICE/ FAX CHANNEL 6
VOICE/ FAX CHANNEL 2
VOICE/ FAX CHANNEL 5
VOICE/ FAX CHANNEL 1
CHANNEL 10
CHANNEL 9
CHANNEL 8
CHANNEL 7
CHANNEL 6
CHANNEL 5
CHANNEL 4
CHANNEL 3
CHANNEL 2 (RS232/V.35)
CHANNEL 1 (RS232/V.35)
10BASET
ETHERNET
COMMAND PORT
EXT. COMPOSITE LINK (RS232/V.35) POWER
I
O
GND
T1 DSU
MONITOR XMT RCV
INTERNAL COMPOSITE LINK
PC or
Terminal Units
Channel Connections
Statistical Multiplexers
AS400 TM
3000-Series Router/Multiport Data/Voice/Fax Frame Relay Access Device
Voice/Fax Channel 8 Voice/Fax Channel 7 Voice/Fax Channel 6 Voice/Fax Channel 5
Voice/Fax Channel 4 Voice/Fax Channel 3 Voice/Fax Channel 2 Voice/Fax Channel 1 XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO
Composite Link Ethernet Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV BTG PWR LNK EXT V35 CTS CD XMT RCV XMT RCV COL LNK XMT RCV V35 XMT RCV V35 3000-Series Router/Multiport Data/Voice/Fax Frame Relay Access Device
Voice/Fax Channel 8 Voice/Fax Channel 7 Voice/Fax Channel 6 Voice/Fax Channel 5
Voice/Fax Channel 4 Voice/Fax Channel 3 Voice/Fax Channel 2 Voice/Fax Channel 1 XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO
XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO XSG RSG XMT RCV E&M FAX FXS FXO
Composite Link Ethernet Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV XMT RCV BTG PWR LNK EXT V35 CTS CD XMT RCV XMT RCV COL LNK XMT RCV V35 XMT RCV V35
MultiFRAD 3000s
Figure 4. Channel Cable Connections
NOTE: only Channels 1, 2, and the composite link support V.35 and RS-232, all other channels
are RS-232 only. There are shunts inside to select V.35 or RS-232.