Multi-Tech Systems FR3060 - Manual (Page 24)

24
MultiFRAD 3000-Series User Guide
22. If your MultiFRAD is going to be connected to a frame relay network with a Synchronous
DCE device and External Clocking, click OK and proceed to step 23 to configure your data
ports.
If your Synchronous DCE device in your frame relay network requires External Clocking
from the MultiFRAD, click on Internal Clock and set your Clock Speed.
If your MultiFRAD is going to be used in a Point-to-point configuration, click PPP/SLIP
and choose the Mode of the DCE device. If the mode is Asynchronous, then choose the
Connection Method.
Then click OK to configure your data ports.