Marantz SR7500 - Manual (Page 45)

41
ENGLISH
ENGLISH
3. Press the DVD source button .
The NAME indicator blinks.
The “ ” blinks to indicate that the letter can be
changed.
4. Press the cursor button twice.
The D in DVD blinks to indicate that the letter can be
changed.
5. Press the 1 numeric button to select A.
Each time the numeric buttons are pressed, the
button cycles through the alphanumeric characters
shown below.
1: A
→ B → C → 1 → A
2: D → E → F → 2 → D
3: G → H → I → 3 → G
4: J → K → L → 4 → J
5: M → N → O → 5 → M
6: P → Q → R → 6 → P
7: S → T → U → 7 → S
8: V → W → X → 8 → V
9: Y → Z → / → 9 → Y
0: SPACE ( ) → + → — → , → ’ → < → > → ? → 0 →
SPACE ( )
6. Press the or cursor button .
The letter is changed to “A”.
• The and cursor buttons can be used to
move the blinking indicator of the section
to be rewritten.
7. Press the or cursor buttons to select
AUDIO on the direct button indicator. The A
flashes to indicate that the name can be
changed.
8. Press the 7 numeric button to select S.
Each time the button is pressed, the button cycles
through S
→ T → U → 7 → S.
9. Press the cursor button to move the flashing
section.
10. Press the 5 numeric button to select O.
11. Follow the same procedure to enter U, N, and
D.
12. When finished entering the text, press the OK
cursor button .
13. Press the M button .
The USE indicator displays on the LCD, and the
newly stored codes can be used.
The input is overwritten, and so the currently
displayed text is erased.
Up to six characters can be entered for the direct
button indicator.
ERASING PROGRAMMED CODES
(RETURNING TO INITIAL SETTINGS)
Codes can be erased in five ways: by buttons,
direct buttons, direct button pages, sources, and
by all memory contents.
Erasing Buttons and Erasing Direct Buttons
This example shows how to erase the code
learned from the PLAY button of the DVD player
and the AUTO code of the AMP direct button.
Erasing buttons
1. Hold down the M button for three seconds or
more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
4. Press the button (PLAY) that you want to
erase while holding down the
CLEAR button .
A message is displayed on the LCD.
5. Press the D4 (YES) direct button to erase.
The code programmed to the (PLAY) button is
erased.
When the code is cleared, the code for this button
resets to the factory default code or becomes blank.
• To cancel the erasing operation, press the
D5 (NO) button to return to the previous
display.
To erase codes programmed for the
CLEAR button, simply press the CLEAR
button twice.
To erase codes programmed for the
S O U R C E b u t t o n , s i m p l y p r e s s t h e
SOURCE button twice.
Erasing direct buttons
6. Press the AMP source button .
7. Press the > button to display the first page for
AMP.
8. Press the D1 (AUTO) direct button to be
erased while holding down the CLEAR button
.
9. Press the D4 (YES) direct button to erase.
The code programmed to the AUTO button is
erased.
When the code is cleared, the code for this button
resets to the factory default code or becomes blank.
The rewritten name returns to the original name.
• To cancel the erasing operation, press the
D5 (NO) button to return to the previous
screen.
10. When the erasing operation is finished, press
the
M button .
The USE indicator displays to indicate that the
remote control can now be operated.
Erasing Direct Button Pages
This example shows how to erase the entire direct
button second page learned from the DVD player.
1. Hold down the M button for three seconds or
more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
4. Press the > button to display the second page.
5. Press the > button while holding down the
CLEAR button .
6. Press the D4 (YES) direct button to erase.
All codes and names programmed to page 2 are
erased. When the codes are cleared, the codes for
this button reset to the factory default code or
become blank. Any rewritten names return to the
original name.
• To cancel the erasing operation, press the
D5 (NO) button to return to the previous
screen.
7. When the erasing operation is finished, press
the
M button .
The USE indicator lights up to indicate that the
remote control can now be operated.
Erasing Sources
This procedure clears all codes and names
programmed to the DVD, TV, or other sources. All
codes and names in the four direct button pages
are also erased.
This example shows how to erase the names and
codes learned from the DVD player.
1. Hold down the M button for three seconds or
more.
The menu is displayed.
2. Press the D5 (ERASE) direct button .
3. Press the DVD source button .
The USE and LEARN indicators blink.
4. Press the DVD source button while holding
down the CLEAR button .
5. Press the D4 (YES) direct button to erase.
All codes and names programmed to the DVD
source are erased. When the codes are cleared, the
codes for this button reset to the factory default code
or become blank. Any rewritten names return to the
original name.
• To cancel the erasing operation, press the
D5 (NO) button to return to the previous
display.
6. When the erasing operation is finished, press
the
M button .
The USE indicator displays to indicate that the
remote control can now be operated.
1 3 4
USE PAGE 1
LEARN
USE PAGE 1 2
LEARN
USE PAGE 1 2
6 8 9
LEARN
USE PAGE 1 2
LEARN
USE PAGE 1 2
LEARN
USE PAGE 1 2
1 3 4
USE PAGE 1
LEARN
USE PAGE 1 2
LEARN
USE PAGE 1 2
LEARN
USE PAGE 1 2
5
1 3 4
LEARN
USE PAGE 1 2 USE PAGE 1
LEARN
USE PAGE 1 2