Miller Electric 301 G - Manual (Page 33)

OM-4411 Page 29
SECTION 8 − MAINTENANCE & TROUBLESHOOTING
8-1. Routine Maintenance
Recycle
engine
fluids.
Y Stop engine before maintaining.
.
See Engine Manual and Maintenance Label for impor-
tant start-up, service, and storage information. Service
more often if used in severe conditions.
* To be done by Factory Authorized Service Agent.
Every 8 h
Wipe up spills. Check fluid levels.
See Section 5-2. OIL
Full
20 h 25 h
Check and clean
spark arrestor screen.
See Section 8-3.
Service air filter wrapper
(foam element). See
Section 8-4.
Every 50 h
Clean and tighten
weld terminals.
Every 100 h
Change oil. See
Section 8-5 and
maintenance
label.
Clean cooling system. See
engine manual.
Service air filter element.
See Section 8-4.
Clean and
tighten battery
connections.
Every 200 h
Replace fuel
filter. See
Section 8-5.
Change oil filter. See Section
8-5 and maintenance label.
Replace
unreadable
labels.
Check spark plugs, and
replace if fouled. Operation
at low speed (1800 rpm)
may increase fouling.
Every 500 h
Repair or
replace cracked
cables.
Service welding generator
brushes and slip rings.
Service more often in dirty
conditions.*
Every 1000 h
Blow out or vacuum inside. During
heavy service, clean monthly.
OR