Miller Electric 301 G - Manual (Page 36)

OM-4411 Page 32
8-5. Changing Engine Oil, Oil Filter, And Fuel Filter
803 127 / S-0842
Y Stop engine and let cool.
1
Oil Drain Valve
2 Oil Filter
Change engine oil and filter accord-
ing to engine manual.
Y Close valve and valve cap
before adding oil and run-
ning engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-2).
3
Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
2
3
4
Full
Tools Needed:
1