Smb settings, Opening the smb setting menu display, Smb settings -10 – Muratec MFX-1430 User Manual

Page 17: Opening the smb setting menu display -10, Smb.settings, Opening.the.smb.setting.menu.display

Advertising
background image

2-10

Network settings

SMB.settings

These settings are required if your LAN uses “NetBIOS over TCP/IP” protocol.

NOTE: Contact your network administrator if you are unsure about this setting.

IMPORTANT: In order to activate new settings, the machine must be rebooted after the new

settings have been entered. Turn the machine “Off” and after three or more

seconds, turn the machine back “On”.

Opening.the.SMB.setting.menu.display

1

Press [Setting] on the control panel.

2

Press [Management].

3

Press [Network Settings].

Advertising
Popular Brands
Popular manuals