MITSUBISHI ELECTRIC WD-52525 - Manual (Page 13)

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Page 13
Optical Engine Replacement
Optical Engine Mounting
The Optical Engine is mounted on the Adjuster assembly as shown in the above diagram.
1) Four screws (a) secure the bottom plate and Optical Engine to the Adjuster assembly.
2) The bottom plate tab (1) slides into slot (1) on the Adjuster.
3) The Optical Engine is secured to the bottom plate by 4 screws (b).
4) The Black Bracket is secured to the bottom plate and the Lamp Box with 4 screws (c).
5) To replace the Optical Engine, the Optical Engine, bottom plate and black bracket need to be removed
together as an assembly. Refer to the following pages for exact replacement instructions.