MITSUBISHI ELECTRIC WD-52525 - Manual (Page 8)

Page 8
MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
CABINET DISASSEMBLY (FRONT VIEW)
WD-52825 /WD-62825
*Refer to the Parts List for Part Numbers
Front Cabinet Disassembly
1. Remove the SPEAKER-GRILLES by pulling forward.
2. Remove screws (a) to remove the COVER-FRONT.
3. Remove screws (b) to remove the GRILLE-BASE.
4. Remove screws (d) on the rear of the upper back cover (3 on each side and 4 across the top).
5. Remove the 4 screws (c) holding the bottom of the Screen Assembly.
6. Unplug connector LN from the Control Panel.
7. Lift the Screen Assembly up slightly then pull towards the front to remove the assembly
8. To disconnect the Card Reader and the Front Inputs:
• Unplug the Card Reader USB connector from the PCB-DM.
• Unplug the Front 1394 cable from the HDD Module (Hard Drive).
• Unplug the CC connector from the Front Inputs.