MITSUBISHI ELECTRIC WD-52525 - Manual (Page 9)

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Page 9
CABINET DISASSEMBLY (REAR VIEW)
(a)
(a)
(b)
(b)
(a)
(a)
(b)
(b)
(b)
FILTER-COVER Removal
Remove 2 screws (d) to remove the Fil-
ter Cover.
COVER-BACK Removal
1) Remove 9 screws (a)
2) Remove 5 screws (b)
3) Remove 2 screws (c)
4) Pull the COVER-BACK
from the cabinet.
Rear Plate Removal
1) Remove 6 screws (a)
2 Remove10 screws (b)
3) Pull the Rear Plate from the
cabinet.
NOTE: To operate set, the Filter Cover must be re-installed after the Cover-Back and Rear Plate have been removed and the
Exhaust Fan must be connected.