MITSUBISHI ELECTRIC WD-52525 - Manual (Page 15)

MODEL: WD-52525 / WD-52725 / WD-52825 / WD-62525 / WD-62725 / WD-62825
Page 15
Remove the following parts from the Optical Engine
• DMD Heat Sensor
• The Optical Engine bottom plate and black bracket
DMD Heat Sensor Removal (Figure 1)
1) Remove screw (a) on the top of the DMD Fan.
2) Set the Heat Sensor aside to install on the replacement Optical Engine.
Figure 1: DMD Heat Sensor
Bottom Plate & Black Bracket Removal
1) Remove the 4 screws (B) from the Bottom Plate (Figure 2)
2) Remove the two screws (C), holding the Black Bracket to the Lamp Box. (Figure 3)
Figure 2: Bottom Plate
(a)
Heat Sensor
(B)
Bottom View
Bottom Plate