Metrologic Instruments IS4910 Series - Manual (Page 37)

31
A
PPENDIX
B: IS4910 D
RIVER
I
NITIALIZATION
F
ILE
The IS4910 Driver initialization file VuQuest2D.ini contains the driver configuration settings.
The file uses the following format:
[Device]
SubKey=
Index=
DLL=
Path=
[Pins]
GPIO_CIF_FV=
GPIO_CIF_LV=
GPIO_CIF_PCLK=
GPIO_CIF_DD0=
GPIO_CIF_DD1=
GPIO_CIF_DD2=
GPIO_CIF_DD3=
GPIO_CIF_DD4=
GPIO_CIF_DD5=
GPIO_CIF_DD6=
GPIO_CIF_DD7=
GPIO_TRIGGER=
GPIO_ILLUM=
GPIO_AIMER=
POLARITY_TRIGGER=
POLARITY_ILLUM=
POLARITY_AIMER=
[Resources]
SysIntr=
DMAChannel=
MaxMemFrames=
[Settings]
IntegrationTime=
MinFlashTime=
IllumControl=
Gain1000=
PixelClock=
I2CBusClock=
I2C_PowerOff=
ReverseRows=
ReverseCols=
ImgWidth=
ImgHeight=
Values in the [Device] section are the basic entries used by the Device Manager under Windows CE in
order to load the driver. And values in the other sections are the driver-specific entries used to configure
the driver and initialize its operating parameters.
Subkey
(optional) specifies the name of driver dedicated subkey under which the driver’s registry settings
should be stored. This subkey is located under the [HKLM\RootKey] key. Default is VuQuest.