Marantz SA8260 - Manual (Page 11)

ENGLISH
6
■
REMOTE CONTROLLER
z
POWER button
b SOUND MODE button
n TIME button
m TEXT button
⁄2 PAUSE button
⁄3 STOP button
⁄4 PLAY button
⁄5 OPEN/CLOSE button
⁄6 DISPLAY OFF button
The buttons listed above are the same to the buttons on the
front panel of the main unit.
Please see the correspond items in “Front Panel” section.
⁄9
0 - 9 (Numerical buttons)
Use these buttons to select tracks directory.
¤0 PROGRAM button
This button is for program play. (See page 13)
¤1 , (Track skip buttons)
: Each time this button is pressed, the track being
played is skipped forward.
: When this button is pressed, the unit goes back
to the beginning of the current track. If the
button is pressed more times, the track being
played is skipped back.
* Search buttons are provided separately for the remote
control unit. Use ¤2 Search buttons for search function.
¤2 , (Search buttons)
: While this button is pressed during playback,
tracks are searched backward.
: While this button is pressed during playback,
tracks are searched forward.
¤3 SCROLL/RECALL button
Use this button to scroll text while displaying text information
in a disc with text.
Also, this button is to check programmed tracks for program
play. (See page 14)
¤4 CANCEL button
Use this button to cancel a programmed track. (See page
14)
¤5 A-B (A-B Repeat button)
This button is to determine starting and ending points for A-B
repeat play. (See page 12)
■
REAR PANEL
A MULTI CHANNEL AUDIO OUT (Analog output)
FRONT L/R : Output for front speakers
SURROUND L/R : Output for surround speakers
CENTER : Output for center speaker
SUB WOOFER : Output for sub woofer
B FILTER STANDARD/CUSTOM
(Filter standard/custom switch)
Set this switch according to the amplifier and speakers to be
connected. For more details, refer to “Filter Switch” section
on page 16.
* Switching the filter setting has to be done while the unit is in
stand-by mode. If the setting is switched while playing, noise
may occur.
C DIGITAL OUT OPTICAL
It outputs the playing CD signal in digital format. This jack is
to be connected with a recording device, amplifier, D/A
converter, etc that has optical digital input using an optional
square type optical digital cable.
* No signal will be output when a SACD is played.
D DIGITAL OUT COAXIAL
It outputs the playing CD signal in digital format. This jack is
to be connected with a recording device, amplifier, D/A
converter, etc that has coaxial digital input using an optional
coaxial digital cable.
* No signal will be output when a SACD is played.
E REMOTE CONTROL IN/OUT
Connecting with a remote cable, this unit can be controlled
by another Marantz unit that has D-bus function.
F EXT./INT. (External/Internal switch)
When using the unit as standalone, set this switch to INT.
position. If this unit is connected to another Marantz unit with
D-bus function and remote control sensor, set the switch to
EXT. position.
* If the unit is used as standalone and the switch is set to EXT.
position, remote control unit cannot be used.
G AC POWER INPUT JACK
Connect the supplied power cord to this jack and a household
AC power outlet.
¤6 RANDOM button
This button is for random play. (See page 13)
¤7 AMS (Automatic Music Scan button)
Use this button for AMS play. (See page 14)
¤8 REPEAT button
This button is for repeat play. Each time this button is pressed,
repeat mode changes as follows. “All Repeat”
→ “Track
Repeat” → “Repeat Off” (See page 12)