Operation, Connecting the power supply, Normal playback – Marantz SA8260 User Manual
Page 15: Sacd player playback, Qpress power switch to turn on, Wpress open/close button, Epress open/close button. r press play button, Mh g, English 10
★ In this instruction manual, some operations can only be performed with the remote control. For operations that can be
performed with buttons both on the main unit and on the remote control, the button names are shown in the
And for operations that can only be performed with buttons on the remote control, the button names are shown in the
Connecting the power supply
Plug the power cable into AC IN jack on the back panel.
Turn on the power switch of the audio unit (amplifier, etc.)
that is connected with this unit. Set the selector on the
connected unit to this unit.
Plug the power cable into an AC outlet.
* The unit turns into stand-by mode and stand-by indicator
SACD player playback
Press POWER switch to turn on.
The disc tray opens. Set a disc on the tray. Make sure the
label side is up.
Disc type is automatically detected and playback is
started. Track number and track elapsed time(minute,
second) appear on the display.
* When a SACD/CD hybrid disc is loaded, SACD layer is
automatically played. If you want to play CD layer, use
button to select CD layer.
(Exp.:Track 6, Elapsed time 2 min 8 sec)
Playback automatically stops at the end of the final track.
SUPER AUDIO CD PLAYER SA8260
T R K
T I M E
9 1 0
1 1 1 2
1 3 1 4
1 5 1 6
1 7 1 8
1 9 2 0
Number of current track
Remaining track numbers