Marantz SR4300 - Manual (Page 35)

31
ENGLISH
OTHER FUNCTION
ATTENUATION TO ANALOG INPUT SIGNAL
When the input signal is too high and the voice distorts even by
throttling the SR4300 VOLUME control, turn on this function. “
ATT ” is
indicated when this function is activated.
“
ATT ” indicator will light up when this function is activated. The signal-
input level is reduced by about the half. Attenuation will not work with
the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT and
DSS/VCR2-OUT.
This function is memorized for each individual input source.
LISTENING OVER HEADPHONES
This jack may be used to listen to the SR4300’s output through a pair
of headphones. Be certain that the headphones have a standard 1/4"
stereo phone plug. (Note that the main room speakers will
automatically be turned off when the headphone jack is in use.)
Notes:
• When using headphones, the surround mode will automatically
change to STEREO.
• The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
DIMMER
You can change the display brightness of the front display.
Press the
DIMMER button on the front panel to change the brightness.
When this button is pressed, the brightness is changed in the following
sequence.
→ dimmed → Display Off → normal → dimmed ....
Note:
• Only DISP indicator will light up on the front display in display
off condition
SELECTING ANALOG AUDIO INPUT OR
DIGITAL AUDIO INPUT
If you have already assign any digital input to input source.
You can select temporarily the audio input mode for each input source
with the
A/D button on the remote controller or front panel.
When this button is pressed, the input mode is switched in the
following sequence.
→ Digital Auto → Digital → Analog → Digital Auto....
In Digital Auto mode, the types of signals being input to the digital and
analog input jacks for the selected input source are detected
automatically.
If no digital signal is being input, the analog input jacks are selected
automatically.
In Digital mode, input is fixed to an assigned digital input terminal.
In analog mode, the analog input jacks are selected.
This selecting is temporarily, so the result will not be stored in memory.
If you need to change input mode completely, use SYSTEM SETUP in
SETUP menu system. (see page 19)
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source selected for listening
through the SR4300 is sent to the record outputs.
This means that any program you are watching or listening to may be
recorded simply by placing machines connected to the outputs for
TAPE OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the
record mode.
To record the input source signal you are currently watching or
listening to
1.
Select the input source to record by pressing the corresponding
input selector button.
The input source is now selected and you may watch or listen to it
as desired.
2.
Outputs the currently selected input source signal to the TAPE
OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT outputs
for recording.
3.
Start recording at the recording component as desired.
Notes:
• If you change the input source during recording, you will record
the signals from the newly selected input source.
• You cannot record the surround effects.
• Digital input signals are only output to the digital outputs. There
is no conversion from digital to analog .
When connecting CD players and other digital components, do
not connect only the digital terminals, but the analog ones as
well.
CLEAR TUNING/P MEMORY
PHONES
STANDBY
POWER ON/STANDBY
S-DIREC HT-EQ
DSS/VCR DVD TV
A/D
6.1CH-IN VCR1 PHONES
CLEAR F/P MODE TUNING/PRESET MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE S-DIRECT HT-EQ
DSS/VCR2 DVD CDR/MD TAPE CD T TV
A/D DIMMER
6.1CH-IN VCR1
1.
SYSTEM REMOTE CONTROLLER RC4300SR
VCR1
DVD
TAPE
MD
CHANNEL/SKIP
ATT.
TV CDR
CD
AMP
TUNE/SEARCH
NIGHT
TUNER
MODE
DISP./RDS
PTY
P.SCAN VCR2
DSS
VCR1
DVD
TAPE
MD
TV CDR
CD
AMP TUNER
VCR2
DSS
1.
SYSTEM REMOTE CONTROLLER RC4300SR
VCR1
DVD
TAPE
MD
ATT.
CD
AMP TUNER
MODE
DISP./RDS
PTY
P.SCAN VCR2
DSS
ATT.
CLEAR F/P MODE TUNING/PRESET MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE S-DIRECT HT-EQ
DSS/VCR2 DVD CDR/MD TAPE CD TUNER TV
A/D DIMMER
6.1CH-IN VCR1
UP
VOLUME
DOWN
DIMMER
CLEAR F/P MODE TUNING/PRESET MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON/STANDBY
MUTE S-DIRECT HT-EQ
DSS/VCR2 DVD CDR/MD TAPE CD TUNER TV
A/D DIMMER
6.1CH-IN VCR1
A/D OFF
TREBLE
OK
CS
2
BASS
1
4
8
5
9
6
3
7
0
MENU
AUTO DTS
DSP
6.1CH
-IN
2CH
EX/ES
M-CH ST
A/D
SETUP/T.TONE
S-DIRECT
F.DIRECT
0
A/D