Marantz SR4300 - Manual (Page 9)

5
ENGLISH
FRONT PANEL
u MODE button
Press this button to select the auto stereo mode or mono mode when
the FM band is selected.
The “
AUTO ” indicator lights in the auto stereo mode.
i Infrared receiving (IR) sensor window
This window receives infrared signals for the remote control unit.
o VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise
increases the sound level.
!0 INPUT FUNCTION SELECTOR buttons
(AUDIO/ VIDEO)
These buttons are used to select the input sources.
The video function selector, such as TV, DVD, VCR1 and DSS/VCR2,
selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CDR/MD, TUNER, and
6.1CH-IN may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with
a picture from another.
Choose the video source first, and then choose a different audio
source to activate this function.
Press
TUNER button to switch the between FM or AM.
!1 6.1CH IN button
Press this button to select the output of an external multi channel decoder.
Press this button again to return the preivious function.
CLEAR F/P MODE TUNING/PRESET MEMORY
PHONES
SURROUND
AV SURROUND RECEIVER SR4300
STANDBY
POWER ON / STNDBY
MUTE S-DIRECT HT-EQ
DSS/VCR2 DVD CDR/MD TAPE CD TUNER TV
A/D DIMMER
6.1CH-IN VCR1
UP
VOLUME
DOWN
w q
!3
e y
!7
r
!5 !6 !4
t
!0 !2 !1
u i o
q POWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON and display
appears on the display panel. When pressed again, the unit turns OFF
and the STANDBY indicator lights.
When the STANDBY indicator is turned on, the unit is NOT
disconnected from the AC power.
w SURROUND MODE Selector knob
When this knob is turned, the surround mode is switched sequentially.
Note:
• Available surround mode is depending on the input signal.
e CLEAR button
Press this button to cancel the station-memory setting mode or preset
scan tuning.
r MEMORY button
Press this button to enter the tuner preset memory numbers or station
names.
t TUNING UP / DOWN buttons
Press thses buttons to change the frequency or the preset number.
y F/P (FREQUENCY / PRESET) button
During reception of AM or FM, you can change the function of the UP/
DOWN buttons for scanning frequencies or selecting preset stations
by pressing this button.